Blanking is a process in which a roll of material (coil) is cut into angular sheets / profile blanks of required shape with the help of metal dies. During this process, the material is cut across the rolling direction of input coils along with piercing of holes / offcuts as per final part design.
The process of Blanking sheet metal involves steel coils being fed through a coil feeder machine equipped with a Press which holds the metal die used for cutting blanks. From this, the cut blanks are then stacked on pallets for further usage.
POSCO-IPPC Blanking Line Specifications
| Line | Blanking |
|---|---|
|
Material |
CR / GI / GA / EG / STS / PO |
|
Thickness (mm) |
0.5 mm ~ 4.5 mm |
|
Input Width |
500 mm ~ 1,850 mm |
|
Output Length |
150 mm ~ 4,000 mm |
|
Press Capacity |
800 MT |
|
Bolster Size |
2,200 mm ~ 4,000 mm |
|
Maker Country |
Japan |
| Line | Blanking |
|---|---|
|
Material |
CR / GI / GA / EG / STS / PO |
|
Thickness (mm) |
0.5 mm ~ 4.5 mm |
|
Input Width |
500 mm ~ 1,850 mm |
|
Output Length |
150 mm ~ 4,000 mm |
|
Press Capacity |
800 MT |
|
Bolster Size |
2,200 mm ~ 4,000 mm |
|
Capacity (MT/year) |
40,000 |
|
Maker Country |
Japan |
For more details about the processing centers, click below