Hot-dip galvanized steel products are now being used in a wide range of automobiles, electrical equipments and other industrial machinery as well as in civil engineering and construction.
POSCO GI/GP/GPSP steel products are Zero Spangle, Uniform Surface roughness, Strong Zinc bonding layer and characterized in excellent formability, weldability, paintability as well as anit corrosion, they can meet the high quality requirements of the users.
Applications
Used for General Purposes in Manufacturing such as:
- Refrigerator
- Air conditioners
- Washing Machines
- Drums / Tubes
- Furniture
- Control Panels
- Decorative lamps
Structural Steel does not need drawability but requires high strength like
- Solar Panels
- Building Structure
- Steel Furniture –
Desk, lockers, almirahs, racks, light weight chairs etc - Structure-
Roofing, side walls, partitions, panels, valley gutters, louvers, false ceilings, partition walls and ducks, rolling shutters, highway bumpers, slotted angles and paint coated products etc
Used where high strength with good formability is required
- Automobile seats, parking brackets
- Center floors and brackets
- Fender and hood
Used where deep drawing quality is required
- Automobile components & body panels
- Air & oil filters
- Fuel tanks
- Components for building
Used for General Purposes in Manufacturing such as:
- Refrigerator
- Air conditioners
- Washing Machines
- Drums / Tubes
- Furniture
- Control Panels
- Decorative lamps
Structural Steel does not need drawability but requires high strength like
- Solar Panels
- Building Structure
- Steel Furniture –
Desk, lockers, almirahs, racks, light weight chairs etc - Structure-
Roofing, side walls, partitions, panels, valley gutters, louvers, false ceilings, partition walls and ducks, rolling shutters, highway bumpers, slotted angles and paint coated products etc
Used where high strength with good formability is required
- Automobile seats, parking brackets
- Center floors and brackets
- Fender and hood
Used where deep drawing quality is required
- Automobile components & body panels
- Air & oil filters
- Fuel tanks
- Components for building
Product Details
| Classification | POSCO India Pune Processing Canter | |
|---|---|---|
|
Available Size |
Thickness (mm) |
0.40 ~ 2.30 |
|
Width (mm) |
800 ~ 1,860 |
|
|
Weight (Ton) |
Max 35 |
|
|
Product Grade |
Commercial, Drawing, Deep Drawing, Extra Deep Drawing, Structural, High-strength Steel, BH, AHSS (DP590 & DP780), Hot Press Forming (HPF1470) |
|
|
Coating Weight (g/m2) |
Both side 60 ~ 600 |
|
|
Inner Diameter (mm) |
508(20”) / 610(24″) |
|
Products, Characteristics & Applications
Hot-dip Galvanized (GI/GP) - Mild Steel
Grades / Specs
| Classification | POSCO Specification (GI & GA) | EN | JIS | Characteristics | Applications |
|---|---|---|---|---|---|
|
Commercial Quality (CQ) |
CGCC |
EN-DX51D |
JS-SGCC |
Used for the parts requiring bending & simple forming |
Bus Body, Fuel Tank, Drums, Furniture |
|
Drawing Quality (DQ) |
CGCD |
EN-DX53D |
JS-SGCD1 |
Suitable for drawing parts |
Automobile Inner Parts, General arts, Automobile Filter Housing |
|
Deep Draw Quality (DDQ) |
CGCN |
EN-DX54D |
JS-SGCD2 |
Non Ageing quality used for Deep drawing parts with good Drawability |
Automobile Inner & Outer parts like Roofs, Fenders, Bannet inner, Tunnel |
|
Extra Deep Draw Quality (EDDQ) |
CGCE |
EN-DX56D |
JS-SGCD3 |
Ultra Low Carbon Steel with excellent deep draw quality |
Automobile Inner & Outer parts like Side Panels, Tail Gate, Quarters, Automobiles Fuel Tanks |
|
Super Extra Deep Draw Quality (S-EDDQ) |
CGCX |
EN-DX57D |
– |
Mechanical Properties
| Grade | Class |
0.2% YS, Mpa Spec. Max |
TS, Mpa Spec. Min |
El % Spec. Min |
|---|---|---|---|---|
|
CQ |
GI / GA |
280 |
270 |
33 / 31 |
|
DQ |
GI / GA |
240 |
270 |
37 / 35 |
|
DDQ |
GI / GA |
210 |
270 |
41 / 39 |
|
EDDQ |
GI / GA |
180 |
270 |
43 / 31 |
|
S-EDDQ |
GI / GA |
160 |
260 |
45 |
Hot-dip Galvanized (GI) - High Strength Steel (HSLA)
Grades / Specs
| Classification | POSCO Specification (GI & GA) | EN | JIS | Characteristics | Applications |
|---|---|---|---|---|---|
|
Bake Hardening Steel (BH) |
PGY180B(GI) |
HX180BD+Z |
– |
This is the high strength material in which yeild strenghth is increased after backing to become more dent resistance & higher formability |
Automobile outer parts like Hood & Doors |
|
PAY180B(GA) |
HX180BD+ZF |
||||
|
PGY210B(GI) |
HX220BD+Z |
||||
|
PAY210B(GA) |
HX220BD+ZF |
||||
|
HSLA (High Strength Low Alloy Steel) |
CGCHS260Y |
HX260LAD |
SGC340 |
This is the high strength material manufactured by adding precipitation hardening elements to low Carbon Steel. Used in automobile mainly for rainforcing elements |
Kinds of Member-Reinforcing Materials |
|
CGCHS300Y |
HX300LAD |
– |
|||
|
CGCHS340Y |
HX340LAD |
SGC400 |
|||
|
CGCHS380Y |
HX380LAD |
SGC440 |
|||
|
CGCHS420Y |
HX420LAD |
SGC490 |
|||
|
IF HSS Steel |
CGCHS35E |
HX220YD |
– |
This is ultra-low carbon steel with special elements such as Ti added. it has high elongation rate and used in automobile where high strength and deep drawability requiered. |
Automobile outer parts like Hood, Automobile Inner Parts, Floor, Reinforcement |
|
CGCHS40 |
HX260YD |
– |
|||
|
CHCHS45E |
– |
– |
|||
|
Dual Phase (DP) |
CGCHS60DP |
HCT590X |
– |
This is high strength and high formability properties by its duel phase structure consisting of micro ferrite & martensite. |
Kinds of Member-Reinforcing Materials |
|
CGCHS80DP |
HCT780X |
– |
Mechanical Properties
| Grade | Guaranteed Value | Class |
0.2% YS, Mpa Spec. Max |
TS, Mpa Spec. Min |
El % Spec. Min |
|---|---|---|---|---|---|
|
PGY180B(GI) |
YS |
GI/GA |
180 |
270 |
40 |
|
PAY180B(GA) |
|||||
|
PGY210B(GI) |
YS |
GI/GA |
210 |
340 |
34 |
|
PAY180B(GA) |
|||||
|
CGCHS260Y |
YS |
GI/GA |
260 |
350 |
28 |
|
CGCHS300Y |
YS |
GI/GA |
300 |
380 |
22 |
|
CGCHS340Y |
YS |
GI/GA |
340 |
410 |
20 |
|
CGCHS380Y |
YS |
GI/GA |
380 |
460 |
18 |
|
CGCHS420Y |
YS |
GI/GA |
420 |
490 |
16 |
|
CGCHS35R |
TS |
GI/GA |
186 |
340 |
35 |
|
CGCHS40 |
TS |
GI/GA |
230 |
390 |
27 |
|
CGCHS45 |
TS |
GI/GA |
275 |
440 |
27 |
|
CGCHS35E |
TS |
GI/GA |
175 |
340 |
34 |
|
CGCHS40 |
TS |
GI/GA |
215 |
390 |
30 |
|
CHCHS45E |
TS |
GI/GA |
255 |
440 |
27 |
|
CGCHS60DP |
TS |
GI/GA |
340 |
590 |
20 |
|
CGCHS80DP |
TS |
GI/GA |
450 |
780 |
16 |
BIS Certified
| Steel Product | Posco Item (Item code) | Steel Works | Items | BIS Grade | Thickness | Width | Length |
|---|---|---|---|---|---|---|---|
|
Galvanized Steel Sheets, plain in the form of coil |
GI |
Gwangyang |
Strips (Coil) |
GP, GPL, GPD, GPED, GPIF, GP300, GP350 class2, GP450 & GP550 |
Thickness: For Grade GP: 0.20 mm ~ 4.0 mm For Grades GPL, GPD, GPED: 0.2 mm ~ 2.3 mm For Grade GPIF: 0.2 mm ~ 2.0 mm For Grade GP300 – 0.2 mm ~ 3.6mm For Grade GP350 Class 2: 0.2 mm ~ 3.2 mm For GP450: 0.2 mm ~ 3.2 mm For GP550: 0.2 mm ~ 2.3 mm Coating Weight: GP, GP300, GP350 Class2, GP450 & GP550: Upto and including 600 gsm GPL, GPD, GPED & GPIF: Upto and including 350 gsm |
600 mm ~ 1,860 mm |
Coil Form |
|
Galvanized Steel Sheets, plain in the form of coil |
GI |
Pohang |
Strips (Coil) |
GP450 |
Thickness: Upto and including 2.18 mm
Coating Weight: Upto and including 120 gsm |
Upto and including 1650 mm |
Coil Form |
|
Galvanized Steel Sheets, plain in the form of coil |
GI |
POSCO TCS, Thailand |
Strips (Coil) |
GP, GPL, GPD, GPED |
Thickness: For Grade GP: 0.30 mm ~ 2.00 mm For Grade GPL: 0.30 mm ~ 2.30 mm For Grade GPD: 0.30 mm ~ 1.45 mm For Grade GPED: 0.30 mm ~ 1.45 mm Coating Weight: GP: 80~275 gsm GPL: 80~180 gsm GPD: 80~220 gsm GPED: 80~180 gsm |
800 mm ~ 1,860 mm |
Coil Form |
Note: The product standards are for reference. Please be sure to confirm the recent standards when making orders with Technical Services.