Slitting Line
Slitting is a sheet metal cutting process with circular knives, which is used to split wide steel coil into narrower width along the length & recoil it into coil form.
The machine typically consists of the following components:
- Un-coiler
- Guides
- Slitter Head
- Scrap winder
- Tension Unit
- Re-coiler
Delhi Processing Center Slitting Line Specifications
| Line | Slitter 1 | Slitter 2 | Slitter 3 |
|---|---|---|---|
|
Material |
CR, GI, GA, EGI, PO, NO, SS, HRPO |
CR, GI, GA, EGI, NO, GO |
CR, GI, GA, EGI, PO, STS, SS, HRPO, POSMAC |
|
Thickness (mm) |
0.4 mm ~ 3.2 mm |
0.20 mm ~ 1.2 mm |
0.6 mm ~ 4.0 mm |
|
Input Width |
500 mm ~ 1,860 mm |
800 mm ~ 1,250 mm |
600 mm ~ 1,550 mm |
|
Output Width |
40 mm ~ 1,860 mm |
15 mm ~ 1,250 mm |
40 mm ~ 1,550 mm |
|
Maker Country |
Korea |
Italy |
Korea |
| Line | Slitter 1 | Slitter 2 | Slitter 3 |
|---|---|---|---|
|
Material |
CR, GI, GA, EGI, PO, NO, SS, HRPO |
CR, GI, GA, EGI, NO, GO |
CR, GI, GA, EGI, PO, STS, SS, HRPO, POSMAC |
|
Thickness (mm) |
0.4 mm ~ 3.2 mm |
0.20 mm ~ 1.2 mm |
0.6 mm ~ 4.0 mm |
|
Input Width |
500 mm ~ 1,860 mm |
800 mm ~ 1,250 mm |
600 mm ~ 1,550 mm |
|
Output Width |
40 mm ~ 1,860 mm |
15 mm ~ 1,250 mm |
40 mm ~ 1,550 mm |
|
Capacity (MT/year) |
88,200 |
74,200 |
97,800 |
|
Maker Country |
Korea |
Italy |
Korea |
Shearing Line
Shearing is a process in which a roll of material (coil) is cut into sheets of required length or pitch. During this process, the material is cut across the rolling direction of input coils.
The process of Shearing sheet metal involves steel coils being fed through a shear machine with straight knives (on top & bottom), which cuts the material into required sheets. From this, the cut sheets are then stacked on pallets for further usage.
Delhi Processing Center Shearing Line Specifications
| Line | Rotary Shear | Mini Shear 1 | Mini Shear 2 | Mini Shear 3 |
|---|---|---|---|---|
|
Material |
CR, GI, GA, EGI, PO, NO, SS |
CR, GI, GA, EGI, PO, SS |
CR, GI, GA, EGI, PO |
CR, GI, GA, EGI, PO, SS, HRPO |
|
Thickness (mm) |
0.38 mm ~ 3.2 mm |
0.5 mm ~ 2.3 mm |
0.38 mm ~ 2.3 mm |
0.60 mm ~ 4.5 mm |
|
Input Width |
500 mm ~ 1,860 mm |
200 mm ~ 800 mm |
200 mm ~ 600 mm |
200 mm ~ 800 mm |
|
Output Length |
400 mm ~ 5,000 mm |
250 mm ~ 3,000 mm |
250 mm ~ 3,000 mm |
200 mm ~ 3,000 mm |
|
Maker Country |
Korea |
Korea |
Korea |
Korea |
| Line | Rotary Shear | Mini Shear 1 | Mini Shear 2 | Mini Shear 3 |
|---|---|---|---|---|
|
Material |
CR, GI, GA, EGI, PO, NO, SS |
CR, GI, GA, EGI, PO, SS |
CR, GI, GA, EGI, PO |
CR, GI, GA, EGI, PO, SS, HRPO |
|
Thickness (mm) |
0.38 mm ~ 3.2 mm |
0.5 mm ~ 2.3 mm |
0.38 mm ~ 2.3 mm |
0.60 mm ~ 4.5 mm |
|
Input Width |
500 mm ~ 1,860 mm |
200 mm ~ 800 mm |
200 mm ~ 600 mm |
200 mm ~ 800 mm |
|
Output Length |
400 mm ~ 5,000 mm |
250 mm ~ 3,000 mm |
250 mm ~ 3,000 mm |
200 mm ~ 3,000 mm |
|
Capacity (MT/year) |
64,000 |
24,000 |
20,400 |
24,000 |
|
Maker Country |
Korea |
Korea |
Korea |
Korea |
Blanking Line
Blanking is a process in which a roll of material (coil) is cut into angular sheets / profile blanks of required shape with the help of metal dies. During this process, the material is cut across the rolling direction of input coils along with piercing of holes / offcuts as per final part design.
The process of Blanking sheet metal involves steel coils being fed through a coil feeder machine equipped with a Press which holds the metal die used for cutting blanks. From this, the cut blanks are then stacked on pallets for further usage.
Delhi Processing Center Blanking Line Specifications
| Line | Blanking |
|---|---|
|
Material |
HRPO, CR, High-Tensile, Stainless steel sheet in coils, GI |
|
Thickness (mm) |
0.3 mm ~ 3.5 mm |
|
Input Width |
400 mm ~ 1,860 mm |
|
Output Length |
200 mm ~ 4,200 mm |
|
Bolster Size |
L/R 4,500 mm x F/R 2,400 mm |
|
Maker Country |
Korea |
| Line | Blanking |
|---|---|
|
Material |
HRPO, CR, High-Tensile, Stainless steel sheet in coils, GI |
|
Thickness (mm) |
0.3 mm ~ 3.5 mm |
|
Input Width |
400 mm ~ 1,860 mm |
|
Output Length |
200 mm ~ 4,200 mm |
|
Press Capacity |
600 MT |
|
Bolster Size |
L/R 4,500 mm x F/R 2,400 mm |
|
Capacity (MT/year) |
30,000 |
|
Maker Country |
Korea |
GO CTL Line
GO Cut to Length is a process in which a roll of material (coil) is cut into transformer sheets and stack laminated cores in a fully automatic process. During this process, the material is cut across the rolling direction of input coils along with piercing of holes as per final part design.
The process of GO Cut to Length sheet metal involves GO coils being fed through a coil feeder, Punch Hole, V-Notch & 2 Shear blades which can cut in 45 or 90-degree angle. From this, the cut blanks are then stacked on pallets for further usage.
Delhi Processing Center GO CTL Line Specifications
| Line | GO CTL |
|---|---|
|
Material |
GO |
|
Thickness (mm) |
0.23 mm ~ 3.5 mm |
|
Input Width |
50 mm ~ 650 mm |
|
Output Length |
300 mm ~ 3,500 mm |
|
Hole Diameter |
5 mm to 35 mm |
|
Maker Country |
Italy |
| Line | GO CTL |
|---|---|
|
Material |
GO |
|
Thickness (mm) |
0.23 mm ~ 3.5 mm |
|
Input Width |
50 mm ~ 650 mm |
|
Output Length |
300 mm ~ 3,500 mm |
|
Hole Diameter |
5 mm to 35 mm |
|
Press Capacity |
600 MT |
|
Capacity (MT/year) |
2,400 |
|
Maker Country |
Italy |
